High performance nozzles

For machine torches Type H

From: 13,80

Ref.75600911

Main characteristics:
The design of the grooves and gas outlet holes allows to increase the cutting speed and therefore to reduce the thermal input to the material and the subsequent internal stresses that this generates.
They perform high quality cuts minimizing the width of the cut and eliminating subsequent reprocessing.
They are suitable for use with low-cost fuel gases such as LPG and Natural Gas.

Individually sold nozzles.

High performance nozzles
Reference Dimensions in mm. Cutting capacity/mm. Speed mm/min Ox pressure (bar) cut-off Gas pressure (bar)
75600911 000VVC 1-9 mm. 650-750 3.5-5.0 0.015-0.2
75600912 0VVC 9-20 mm. 300-630 5.0-6.0 0.015-0.2
75600913 0-1/2 VVC 20-35 mm. 550 7.0 0.015-0.2
75600914 1VVC 35-60 mm. 400-480 7.0 0.015-0.2
75600915 1-1/2 VVC 60-75 mm. 310 7.0 0.015-0.2
75600916 2VVC 75-125 mm. 240-280 7.0 0.015-0.2
75600917 2-1/2 VVC 125-150 mm. 200 7.0 0.015-0.2
75600918 3VVC 150-175 mm. 180 7.0 0.015-0.2
75600919 4VVC 175-200 mm. 180 7.0 0.015-0.2
75600920 5VVC 200-225 mm. 150 8.0 0.015-0.2

Share this article on your favorite social networks